Before cleaning the oil press, you need to pour out the oil in the oil drum, and then use paper towel or clean cloth to clean the oil on the surface of the oil press to prepare for cleaning the oil press.
1. When cleaning the oil press, do not use hard objects or sharp tools to scrape the surface of the oil press, so as not to scratch the surface of the oil press, affecting the appearance and service life.
2. When cleaning the oil press, unplug the power supply first to avoid electric shock or short circuit.
3. When cleaning the oil press, do not dip or soak the oil press in water, so as not to affect the normal use of electrical appliances.
4. When cleaning the oil press, pay attention to protect their hands, do not clean the appliance in the open state.
5. In order to ensure the hygiene and safety of edible oil, it is recommended to thoroughly clean the oil press every once in a while and sterilize the oil drum, filter and other parts of the oil press thoroughly to ensure that the quality of the oil extracted is safe and reliable.
Models |
MK60 |
MK1685 |
MK1688 |
MK120 |
MK50 |
Power |
Main engine |
2.0 kw |
3kw |
3.5 kw |
4kw |
Vacuum pump |
4x-3kw |
6x-5.5kw |
6x-7.5kw |
6x-11kw |
6x-30kw |
Heater |
2.0kw |
3kw |
3.5kw |
4kw |
5kw |
capacity |
40-50kg/h |
80-160kg/h |
150-260kg/h |
260-400kg/h |
450-550kg/h |
Whole weight |
270kg |
550kg |
760kg |
915kg |
1550kg |
Outside dimension |
1350*950*1170mm |
1700*1300*1600mm |
2000*1350*1750mm |
2050*1400*1800mm |
2450*1980*1770mm |
1. Soak the disassembled parts in detergent or washing agent for about 30 minutes. 2.
2. Take out the soaked parts, rinse them with clean water and dry them with a clean towel or soft cloth.
3. Wipe the body of the oil press with a damp cloth to clean up the oil residue, oil and other dirt.
Sterilization
1. Disinfect the dismantled parts with hot water above 80 degrees or steam in a pressure cooker, and the disinfection time is generally about 10 minutes.
2. For parts that can not be cleaned and disinfected with water, you can use alcohol or disinfectant to disinfect them.
Assembly
1. assemble the cleaned parts and make sure that each part is placed in the correct position and assembled with excellence, without omissions and errors.
2. Assemble the oil press according to the requirements of the manual, plug in the power supply for test run to confirm that the oil press can work properly.