1. Reasons for the blockage of the oil line of the hydraulic oil press
The following reasons may cause the blockage of the oil line of the hydraulic oil press:
1. The hydraulic oil press has been used for a long time, and the filter screen of the oil inlet or oil return port becomes dirty or blocked, so that the hydraulic oil cannot flow smoothly, causing the oil line to be blocked.
2. The hydraulic oil used itself is of poor quality, or it contains impurities, water and other impurities, causing oil line pollution and pipeline blockage.
3. The excessive use of the hydraulic oil press causes the piston to accumulate dirt, carbon deposits and other sediments, which increases the friction of the oil circuit and causes the oil circuit to not run smoothly.
.jpg)
| Models |
MK60 |
MK1685 |
MK1688 |
MK120 |
MK50 |
| Power |
Main engine |
2.0 kw |
3kw |
3.5 kw |
4kw |
| Vacuum pump |
4x-3kw |
6x-5.5kw |
6x-7.5kw |
6x-11kw |
6x-30kw |
| Heater |
2.0kw |
3kw |
3.5kw |
4kw |
5kw |
| capacity |
40-50kg/h |
80-160kg/h |
150-260kg/h |
260-400kg/h |
450-550kg/h |
| Whole weight |
270kg |
550kg |
760kg |
915kg |
1550kg |
| Outside dimension |
1350*950*1170mm |
1700*1300*1600mm |
2000*1350*1750mm |
2050*1400*1800mm |
2450*1980*1770mm |
2. Treatment methods for blockage of the oil line of the hydraulic oil press
1. Clean the filter screen: Clean the filter screen of the oil inlet and oil return port to remove impurities or dirt inside to ensure the smooth flow of hydraulic oil.
2. Replace hydraulic oil: The quality of hydraulic oil of different brands is different. New hydraulic oil needs to be replaced. If the original hydraulic oil has been used for a long time or contains impurities, water and other impure substances, replacement is necessary.
3. Clean the oil pipe: The oil pipe is one of the important components of the oil line. If the oil pipe is blocked, the hydraulic oil is difficult to circulate, so the oil pipe needs to be cleaned regularly to ensure that the oil line is unobstructed.
4. Replace the seal: The seal of the hydraulic oil press is a key component to prevent the leakage of hydraulic oil. If the seal is damaged or aged, it will also cause the hydraulic oil to leak and even cause the oil line to be blocked. If a problem is found with the seal, it should be replaced in time.
5. Maintain the hydraulic system: Ensure the normal operation of the hydraulic system to avoid the occurrence of oil line blockage. Maintaining the hydraulic system is also a necessary task. Regular inspection and maintenance are carried out to ensure the normal use of the hydraulic oil press.
.jpg)
.jpg)