What is the reason why the oil press cannot feed?

1. The feed pipe is blocked
If the feed pipe of the oil press is full of oil residue or debris, it will cause the feed to be blocked and unable to feed. At this time, you can clean the feed area, check whether the pipe is damaged and has debris, and clean it up.
2. The feed pipe expands at high temperature
If the oil press is always at high temperature, the feed pipe may expand, which will also cause feeding difficulties. At this time, it should be repaired after cooling down.
2. Machine failure
1. Damage to the rotor, grate teeth or grate plate
When the rotor, grate teeth or grate plate is damaged, it will affect the feed and cause the oil press to fail to work properly. At this time, the damaged parts need to be replaced.
2. Problems with the transmission system
If there is a problem with the transmission system of the oil press, the bearings are severely worn, which will cause the machine to fail to work properly or even fail to feed. Therefore, it needs to be replaced in time.
3. Maintenance
1. Irregular cleaning
The oil press needs to be cleaned regularly, otherwise it is easy to accumulate dirt, reduce work efficiency and cause problems such as failure to feed.
2. Insufficient lubrication
The lubrication of the oil press needs to be checked in time. If it is insufficient, it will affect the normal operation of the machine and needs to be lubricated.
The above are the reasons and solutions for the failure of the oil press to feed. If any problems occur, they must be checked and handled in time to ensure the normal operation of the oil press.

Soybean Oil Press Machine Oil press machine peanut oil press plant