What should I do if the oil press oil line produces too much slag?

1. Incomplete cleaning of the equipment. During use, the oil press equipment needs to be cleaned. If the cleaning is not thorough, the residual impurities will cause the oil line to produce too much slag.
2. Damaged or aged accessories. If the spiral, filter and other accessories of the oil press are damaged or aged, it will also cause the oil line to produce too much slag.
3. Improper operation. The operator of the oil press needs to operate strictly in accordance with the operating procedures. If the operation is improper, it will also cause the oil line to produce too much slag.
 
2. Solution
For the situation of excessive slag, the following methods can be used to solve it:
1. Clean the equipment. Clean the oil press equipment regularly, use special cleaning agents when cleaning, and thoroughly remove the dirt and impurities accumulated inside.
2. Replace accessories. If the accessories of the oil press are found to be damaged or aged, they need to be replaced in time to ensure the normal operation of the equipment.
3. Adjust the operation. For excessive slag discharge caused by improper operation, the operation process needs to be adjusted and the correct operation process needs to be followed to ensure the normal operation of the equipment.

III. Precautions
When handling, the following points need to be noted:
1. The operator needs to have certain professional knowledge and experience to ensure the correctness and safety of the operation.
2. When cleaning the equipment, you need to pay attention to safety and ensure that the electrical system is powered off before cleaning to avoid electric shock accidents.
3. When replacing accessories, you need to choose accessories with good quality and correct specifications to ensure the stability and reliability of the equipment operation.

Oil press machine peanut oil press plant Soybean Oil Press Machine